DIRECTIONS FOR USE:
It is a violation of Federal law to use this product in a manner inconsistent with its labeling.
To dispense product, open tab on top of container and shake gently. Close tab when finished. Scram Crawling Insect Killer can be applied directly from the canister or can be applied with a hand duster, powder duster or similar means of application to areas where crawling insects are found. Scram is intended for application with a hand duster, powder duster, or similar means of application to areas where crawling insects are found.
Scram is intended for application with hand, a bulbous duster or power duster, or by other suitable means, to cracks, crevices, voids, hiding and runway areas, and places where pests are found indoors or outdoors use. Apply lightly and uniformly.
Scram Crawling Insect Killer is a ready-for-use insecticide dust that has given effective knockdown and control of the pests listed. Scram Crawling Insect Killer is for use in residential and commercial pest control, in and around buildings and structures and their immediate surroundings, and on modes of transport
Scram can be used in apartments, homes and other residential buildings, such as daycare centers, schools, hospitals, nursing homes, hotels, motels, industrial buildings, laboratories, office buildings, other commercial and industrial facilities, restaurants, food/feed handling establishments and food processing plants, warehouses, and on aircraft, buses, rail cars, trucks, trailers and vessels.
In living areas, make applications in such a manner as to avoid deposits on exposed surfaces or introducing the material into the air. Treat a small area of the surface to be treated and look for staining or other adverse reaction before making regular application.
Apply insecticide directly into cracks and crevices. Use a bulbous duster or other suitable equipment. Apply lightly and uniformly to infested areas. Pay particular attention to cracks, crevices and voids where insects might be harboring, traveling, breeding or entering the structure.
Examples of these areas are service ducts, false floors and ceilings, wall voids, around electrical and telephone fittings and equipment, around water and sewer pipes, under and behind cabinets, refrigerators and sinks, around window and door frames, along baseboards, in attics and crawl spaces, landscaped (including lawns and turf) and mulched areas.
The amount of product to be applied will vary with the site but stay in the range of 0.15-0.6 oz/10 sq. ft. or 1-5 oz/100 sq. ft. Repeat treatments as necessary to maintain adequate control.
For control of earwigs, millipedes, centipedes, silverfish, cockroaches, and ants. Sprinkle around room perimeter and leave the product on the floor leaving a thin layer of Scram Crawling Insect Killer in areas where these pests are found or might hide, such as cracks and crevices, behind and beneath refrigerators, cabinets, stoves, garbage cans, and in and around sewer pipes and drains, window frames, and in attics and basements. Dust insects directly if possible. Repeat treatment regularly.
Bed Bugs and Dust Mites in Mattresses: Sprinkle material evenly and leave on the mattress for at least 15 minutes then vacuum. Sprinkle in mattress bag and leave material in the bag. Apply once a week for four weeks as described above.
Ants, Cockroaches, Earwigs, and other Crawling Insects: Lightly coat a thin layer of Scram Crawling Insect Killer in and around cracks, crevices or voids associated with windows, doors, porches, screens, eaves, patios, garages, under stairways, around foundations, sewers, animal burrows, mulched areas, manure or compost piles and in crawl spaces and other areas where insects might be harboring, traveling, breeding or entering the structure. Dust around foundations, along ant trails, and around sewer pipes and drains. Repeat treatment as necessary.
Fleas: Thoroughly treat the floor, carpeting and bedding in and around pets' sleeping quarters. Treat surrounding cracks and crevices, baseboards, carpeting and wherever fleas are suspected. Sprinkle material evenly and leave on carpet for at least 15 minutes then vacuum. Apply once a week for four weeks as described above.
Earwigs, Millipedes, Centipedes, Silverfish, Cockroaches, and Ants: Sprinkle around room perimeter and leave the product on the floor leaving a thin layer of Scram Crawling Insect Killer in areas where these pests are found or might hide, such as cracks and crevices, behind and beneath refrigerators, cabinets, stoves, garbage cans, and in and around sewer pipes and drains, window frames, and in attics and basements. Dust insects directly if possible. Repeat treatment regularly.
Carpet Beetles, Furniture and Varied Webbing Clothes Moths and Spiders: Dust along baseboards, carpet edges, under carpeting, furniture, in closets and shelving where these insects are seen or suspected.
Bees, Wasps, Hornets, Paper Wasps and Yellow Jackets: It is generally advisable to treat wasp and bee nests in the evening when insects are less active and have returned to the nest. Wear protective clothing, if deemed necessary, to avoid stings. Using hand or powder duster or other suitable means (with extension tubes if necessary), thoroughly dust nest, nest entrance and surrounding areas where insects alight. Nests in voids should be located and treated. If necessary, drill a hole into the void(s), blow dust in, and reseal. For ground wasps and yellow jackets, dust entrance and surrounding areas. For best results, carefully check nests 1 - 2 days after treatment to ensure complete kill. When treating overhead nests, apply in such a manner as to avoid drift onto the applicator.
Fruit and Phorid Flies: Apply where these insects harbor, travel, breed or enter the structure. For example: under cabinets or shelving; behind or under equipment or drains; protected exterior areas such as eaves, trash corrals and dumpsters; and other areas where organic debris may accumulate.
Apply lightly approximately one 1 pound per 1,000 square feet on all interior wall surfaces of empty storage areas. Where possible, special attention should be given to applying to cracks, crevices, and other areas where insects hide or crawl. After application there is no need to remove the product or aerate the areas. Leave undisturbed for two to three days to eliminate existing infestations before filling. It is desirable to reapply the product each time the storage area is emptied.
Treat grain and seed as soon after harvest as possible. Scram Crawling Insect Killer (kills insects only) and might be applied to the grain at the time of storage, to protect it from further damage. Adjust the moisture content of grain to not more than 12 percent by weight.
Using standard milling equipment apply at the rate of 2 to 7 pounds directly onto each ton of bean, dry grain or seed to be treated. Thoroughly mix with grain. Product might be dispensed into the grain either at the bottom of an elevator leg or as it is being moved into storage by auger or conveyor belt. Seal bin for storage. It is wise to check the status of stored grains regularly.
IMPORTANT: Treated grain will have a dry appearance, its movement speed will be reduced, and the grade and test weight may be lowered. Milling, baking, nutritive and germination qualities of grain or seed however are not affected by this treatment.
Thoroughly mix 1 cupful (2 1/2 oz.) of Scram Crawling Insect Killer into each 25 lbs. of grain so that substantially all kernels are lightly coated with the product. Place treated grain into an "open head" 5 or 6 gallon plastic pall for storage. Tightly replace lid for seal.
Apply to control the insect pests as listed below as a crack and crevice or a spot treatment in areas where food or feed is, such as received, processed (including enclosed processing systems), packaged (bottled, boxed, canned, wrapped), transported, stored (including waste), prepared, or served, as a crack and crevice treatment apply sparingly into cracks and crevices using equipment designed to place powder into specific locations.
Limit spot treatments to wall or floor surfaces where pests have been seen or where pests are suspected of hiding. Individual spot treatments must not exceed 2 sq. ft. All food or feed must be removed or covered before treatment. Treat open spaces below floors, above ceilings, within walls, under stairs, underneath and behind equipment or appliances, around pipes, under sinks, in utility closets and around garbage and waste cans for Non-Food Areas.
Apply (as directed above) as a crack and crevice or a spot treatment for control of ants, box elder bugs, crickets, roaches and silverfish to areas where pests hide, run or land, such as attics and spaces above suspended rooms, basements, and crawl spaces, cracks in baseboards, moldings, and door frames, corners, in closets, cabinets, and shelves, window sills and frames, under and behind furniture and appliances. Work into and apply under rugs, door mats, couches, etc.
Scram Crawling Insect Killer controls listed insect attack against feed grains, seeds, stored grains, barley, beans, buckwheat, corn, flax, oats, pea, rice, rye, soybean and sorghum (milo) and wheat.
Scram Crawling Insect Killer kills listed exposed grain infesting insects including: rice weevils, lesser grain borers, flat grain beetles, saw toothed grain beetles, granary weevils, angoumois grain moths, Mediterranean flour moths, Indian meal moth (larvae), red flour beetles, and confused flour beetle.
Food/feed handling establishments are places other than private residences in which food/feed is held, processed, prepared or served. In food handling areas, or areas where food or feed products are prepared or stored, apply as a crack and crevice or spot treatment.
As a crack and crevic treatment, apply sparingly into cracks and crevices using equipment designed to place powder into specific locations. Limit spot treatments to walls or floors where pests are suspected of hiding. No individual spot treatments should exceed 2 sq. ft. Remove or cover all food or feed items in the treatment area before applying product. Treat open spaces below floors, above ceilings, within walls, under stairs, underneath and behind equipment or appliances, around pipes and sinks, in utility closets and around garbage and waste cans.
For best results, apply to dry areas. Repeat treatment on dry surfaces, as needed, to maintain control of problem pests.
All prices are in USD.